Products & work
Parts we’ve designed and printed.
A look at real jobs from the shop. Need something like these? Send measurements and I’ll make it fit.
Featured product
Pergola Beam End Plug
Custom-designed and printed in PETG for a customer’s pergola. It closes the open end of a rectangular pergola roof beam channel with a press fit: firm hand push, no mallet.
- Tapered, rounded tip for easy starting
- 1.2 in rectangular face
- Rounded tab with a centered 3/8 in hole for 550 paracord, to tie off shade cloth, lights and more
- Tested: fits snugly
- Weather-resistant PETG; colors depend on available filament
- Can be resized for other beam channels: send your measurements
Featured product
4×4 Post Cover
A decorative, weather-minded cover for a standard wood 4×4 post (nominal 4×4, actual 3½ in). American Prairie style: long, low horizontal lines and a stepped hipped roof, designed and printed here in Llano.
- Fits nominal 4×4 wood posts (3½ in / 88.9 mm); 90.5 mm socket with crush ribs for a firm seat
- Prairie Pavilion Low silhouette — broad eaves and a flat top
- Skirt slips over the post; weep notches let water escape
- Weather-resistant PETG recommended outdoors; colors depend on available filament
- Other roof styles available on request
More from the shop
Designed or printed here.

Monkey lid plug
A replacement lid plug with an octagonal stem and a sculpted monkey face on the cap, printed in PLA. A taller version adds a finger tab for grip.
3D model render
Monkey figure
A sitting monkey figure, modeled and printed on our Bambu A1 mini.
3D model render
Turkana Boy skull replica
A replica of the Turkana Boy fossil skull with a separate jaw and display stand, scaled to 70% to fit our printer.
3D model render
Liftgate pull-down hook
A PETG hook for a Subaru Crosstrek liftgate that holds a 1 in strap so the open gate is easier to reach and pull down.
3D model render
Slip-on banner clip
A PETG clip that slips over a fabric caddy rim with a round piping bead to hold a banner. Made in small, medium and large sizes.
3D model render
Flat bracket
A flat mounting bracket, 76 × 19 × 4 mm, with two countersunk screw holes.
3D model render
Gargoyle gutter spout
A carved-stone-style gargoyle that mounts under a 2½ in gutter outlet, with water pouring out between the fangs. Design in progress, not printed yet.
Design preview, coming soon
Cursive nameplate
A cursive name cutout, 80 mm wide and 2 mm thick. It was the first print on our printer.
3D model renderWant one, or something like it?
Send measurements and a photo, and I’ll tell you what’s possible.